KG Krea 2 Concept Slider Stack V11:
KGKrea2ConceptSliderStackV11 combines concept-slider directions with an image prompt to produce conditioning for image generation. It lets you steer multiple visual concepts together while limiting their combined strength, and it can apply different directions during early layout and final-detail stages. Sliders describing the same pair of concepts are grouped, opposite directions can cancel, and inactive directions are left out. At very low slider strengths, the node transitions toward plain-prompt conditioning rather than making an abrupt change. This gives you a way to explore subtle adjustments or build a stronger combined look while keeping track of how the sliders were applied.
KG Krea 2 Concept Slider Stack V11 Input Parameters:
Krea CLIP
The CLIP encoder used to turn your prompt and slider concept text into conditioning. Connect the Krea CLIP required by this workflow; when slider studies are needed, V11 checks for a Krea Qwen encoder that supports token-span muting. This is a required CLIP input, with no default or numeric range specified in the provided interface.
Final image prompt
The prompt describing the image you want to make. The node uses it as the base description while studying and applying slider directions; if sliders are bypassed, it encodes this prompt alone. This is a required STRING input. No default or length limit is specified in the provided interface, although an overly long prompt or slider concept text can prevent the node from resolving slider spans.
Overall slider reach
The manual control for the overall reach of connected sliders. A value of zero triggers an exact plain-prompt bypass, with no slider studies; higher values allow the collected sliders to have more influence before the combined budget is applied. In automatic scaling mode, this manual value is ignored and the node calculates an effective reach from the active, grouped sliders. This is a required FLOAT input. The inherited interface does not provide its widget default or range here; the execution code uses 1.0 if the value is absent and clamps the effective value to 0.0–3.0.
Reuse slider studies
Controls whether previously calculated slider studies can be reused between runs. The execution code enables reuse when this value is ``reuse between runs
- faster tuning
; choosing another available value disables that reuse, so the studies are calculated again. This is a required string-choice input. The inherited interface does not show its full option list or widget default here; the execution code usesreuse between runs - faster tuning`` if the value is absent.
Combined slider budget
Sets the maximum combined magnitude of slider coefficients separately for the early and final phases. If a phase exceeds the budget, its slider coefficients are scaled down together; this bounds the coefficients, not the amount of visible change you will perceive. Zero triggers an exact plain-prompt bypass with no slider studies. In automatic mode, this manual setting is ignored. This is a required FLOAT input with default 2.0, minimum 0.0, maximum 6.0, and step 0.1.
Early-to-final handoff
Sets where conditioning changes from the early-layout phase to the final-details phase. Use it with slider cards assigned to early layout only or final details only to give those directions different parts of the generation process. At 0.0, early-only card weights are inactive; at 1.0, final-only card weights are inactive. This is a required FLOAT input with default 0.4, minimum 0.0, maximum 1.0, and step 0.01.
Slider 1
An optional KG_KREA_SLIDER card supplying a concept direction to the stack. When connected and active, its value and concept texts contribute to the grouped slider directions; its timing can apply it to the whole image, early layout only, or final details only. A card can be skipped or cancel with an opposing direction. No default, minimum, or maximum for the card is specified in this node’s interface.
Slider 2
A second optional KG_KREA_SLIDER card. Use it to add another concept direction; the node groups matching concept pairs and combines their weights for each phase rather than treating every matching card as a separate axis. Its card-level settings are not specified in this node’s interface, and this socket has no stated default or numeric range.
Slider 3
A third optional KG_KREA_SLIDER card for another concept direction. Its contribution depends on whether the card is active, its slider value, and its timing; a matching card in the opposite direction can reduce or cancel its combined effect. This socket has no stated default or numeric range.
Slider 4
A fourth optional KG_KREA_SLIDER card. Connect it when you want to combine an additional direction with the others; the node includes active cards when calculating grouped strengths and phase-specific budget limits. This socket has no stated default or numeric range.
Slider 5
A fifth optional KG_KREA_SLIDER card for extending the stack. Like the other slider sockets, it can contribute to both phases or only the phase selected by its card timing, subject to grouping, cancellation, and the combined budget. This socket has no stated default or numeric range.
Slider 6
A sixth optional KG_KREA_SLIDER card. It lets you add another concept direction without replacing an existing card; active contributions are evaluated alongside the other connected sliders. This socket has no stated default or numeric range.
Slider 7
A seventh optional KG_KREA_SLIDER card. Its contribution can be scaled along with other active directions if their combined coefficient magnitude exceeds the effective budget. This socket has no stated default or numeric range.
Slider 8
An eighth optional KG_KREA_SLIDER card, providing the last slider connection exposed by this node. It follows the same grouping, timing, cancellation, and budget behavior as the other slider sockets. This socket has no stated default or numeric range.
Slider scaling mode
Chooses how the stack determines its effective reach and budget. manual uses the reach and budget controls you set, preserving saved manual workflows. automatic ignores those two manual values, calculates reach from active grouped phase loads without increasing small values, and uses an effective budget of up to 6.0. This optional string-choice input offers manual and automatic; its default is manual.
KG Krea 2 Concept Slider Stack V11 Output Parameters:
conditioning
The CONDITIONING result to pass to a compatible downstream generation workflow. With active sliders, it combines the prompt with the studied concept directions at their effective phase weights. When early and final weights differ and the handoff lies between its endpoints, the result contains conditioning assigned to the corresponding timestep ranges. If reach or budget is zero, or no axes remain after cancellation and timing, it is the exact plain-prompt conditioning.
slider_report
A STRING explanation of what the node did. For an active stack, it reports the scaling mode, effective reach and budget, number of encoder passes, distinct axes and active cards, phase budget scales, handoff, and each grouped direction’s early and final coefficients. It also lists skipped cards and notes automatic scaling or the low-strength neutral transition when applicable. On a plain-prompt bypass, it instead gives the reason, helping you distinguish an intentional neutral result from an unexpectedly inactive stack.
KG Krea 2 Concept Slider Stack V11 Usage Tips:
- Start in
manualmode with the default2.0combined budget, then inspectslider_reportas you tune cards. The report shows whether the budget scaled down your requested directions; coefficient limits do not guarantee a particular amount of visible change. - Choose
automaticwhen you want the node to manage reach from the active grouped sliders. If you changeOverall slider reachorCombined slider budgetand see no effect, check whether this mode is enabled. - Assign layout-oriented cards to
early layout onlyand detail-oriented cards tofinal details only, then adjust the handoff from its0.4default. Avoid a handoff of0.0if you need early-only cards, or1.0if you need final-only cards. - Keep
Reuse slider studiesonreuse between runs - faster tuningwhile repeatedly adjusting slider strengths with the same studies. Disable reuse using another available choice when you specifically want the studies recalculated. - For subtle effects, check the report’s early and final coefficients. Below
0.25total axis weight in a phase, the node blends toward plain-prompt conditioning; an inactive phase uses the plain prompt.
KG Krea 2 Concept Slider Stack V11 Common Errors and Solutions:
V11 sliders require a Krea Qwen encoder with token-span muting support
- Explanation: Slider studies need a compatible encoder that supports muting specific concept-text spans, but the connected CLIP does not expose that support.
- Solution: Connect the appropriate Krea Qwen CLIP for this workflow and verify that its encoder implementation supports token-span muting.
V11 could not resolve all slider pole spans; shorten the prompt/poles
- Explanation: The node could not identify every slider concept span in the encoded text, so it cannot reliably study the directions.
- Solution: Shorten
Final image promptor the concept texts in your connected slider cards, then try again.
Unknown V11 slider scaling mode
- Explanation: The supplied scaling-mode value is neither
manualnorautomatic. - Solution: Select one of those two supported options. If the value comes from a saved workflow or external input, update it to match the current node.
Unknown V11 slider timing
- Explanation: A connected active slider card supplies a timing value the node does not recognize.
- Solution: Set that card’s timing to
whole image,early layout only, orfinal details only.
V11 slider controls must be finite
- Explanation: Reach, budget, or handoff was supplied as a non-finite number, such as an invalid calculated value.
- Solution: Replace the affected control with a normal finite number. Use the widget ranges where available: budget
0.0–6.0and handoff0.0–1.0.
V11 slider value must be finite
- Explanation: An active slider produced a non-finite weight, which cannot be used to calculate its direction.
- Solution: Check connected slider cards for an invalid calculated or externally supplied value, and replace it with a finite number.
V11: reach or budget is zero; exact plain-prompt bypass, no slider studies.
- Explanation: This is a report message, not a failure. In manual mode, zero reach or zero budget causes the node to encode only your final image prompt.
- Solution: If you intended to apply sliders, set both manual controls above zero. If you intended a plain-prompt result, no change is needed.
V11: no active axes after cancellation/timing; exact plain-prompt bypass.
- Explanation: This is a report message, not a failure. No slider directions remain after the node accounts for active cards, opposing directions, and timing.
- Solution: Check that cards are connected and active, that opposite directions are not cancelling, and that your handoff does not exclude the timing selected on the cards you want to use.
