Save 4 hours! We auto-setup your workflow! Free!

Drop your workflow.json — we handle every dependency, custom node, and model. Just open the link and run.

Auto-Setup Workflow Json (Free) Now!
ComfyUI > Nodes > comfyui-lora-FindingLora

ComfyUI Extension: comfyui-lora-FindingLora

Repo Name

comfyui-lora-FindingLora

Author
shootthesound (Account age: 1559 days)
Nodes
View all nodes(1)
Latest Updated
2026-07-23
Github Stars
0.01K

How to Install comfyui-lora-FindingLora

Install this extension via the ComfyUI Manager by searching for comfyui-lora-FindingLora
  • 1. Click the Manager button in the main menu
  • 2. Select Custom Nodes Manager button
  • 3. Enter comfyui-lora-FindingLora in the search bar
After installation, click the Restart button to restart ComfyUI. Then, manually refresh your browser to clear the cache and access the updated list of nodes.

Visit ComfyUI Online for ready-to-use ComfyUI environment

  • Free trial available
  • 16GB VRAM to 80GB VRAM GPU machines
  • 400+ preloaded models/nodes
  • Freedom to upload custom models/nodes
  • 200+ ready-to-run workflows
  • 100% private workspace with up to 200GB storage
  • Dedicated Support

Run ComfyUI Online

comfyui-lora-FindingLora Description

comfyui-lora-FindingLora is a model-only ComfyUI loader for searching and bookmarking LoRAs, stacking them at adjustable strengths, saving reusable sets and trigger words, and chaining loaders.

comfyui-lora-FindingLora Introduction

comfyui-lora-FindingLora is a ComfyUI node for finding, organizing, and combining LoRAs without repeatedly scrolling through a long dropdown or rewiring your workflow. It works as a model-only LoRA loader: you connect a MODEL to it, choose a LoRA, and pass the resulting MODEL on to the next node.

The extension adds several conveniences to that basic workflow. You can search your LoRA library by typing part of a name, bookmark favorites, save their trigger words, combine multiple LoRAs in one node, and save combinations as reusable sets. When you need a separate loader, a button can create one and connect it into the existing model chain.

Finding LoRA node showing its bookmark bar, LoRA picker, strength control, and chaining button

How comfyui-lora-FindingLora Works

Think of the node as a stop along your workflow’s model line. A model enters the node; the node applies your selected LoRA and any additional LoRAs in its stack; then the updated model continues to the next node. The main LoRA is applied first, followed by stacked LoRAs in the order shown.

To choose a LoRA, click the LoRA bar. The picker initially shows names alphabetically and highlights your current selection. Start typing to narrow the list. You can type a continuous piece of a filename, or use a few letters that appear in the right order. A continuous match ranks ahead of a scattered one. The picker shows up to 200 results at a time to remain responsive with large libraries.

Bookmarks provide a shorter list of LoRAs you use often. You can also attach a trigger word or phrase to a bookmark. The node displays a saved trigger for the active LoRA so you can click to copy it. It also provides a trigger text output containing saved triggers for the applied LoRAs. To use that output in a prompt, connect it through a string-concatenation node to your prompt-encoding chain.

The loader is model-only: it has no clip input or output. It is intended for workflows where CLIP does not need to pass through the LoRA-loading chain, including the kinds of workflows the author lists for Klein 9B, Flux 2, Wan, and Z-image.

comfyui-lora-FindingLora Features

Find and bookmark LoRAs

Click the LoRA bar to browse every LoRA available in your loras/ folder. Type to search, use ↑ and ↓ to move through results, press Enter to select, or press Esc to close the picker without changing your selection. For example, searching kase can help you find a filename such as character_kasey_v3.safetensors without scrolling through the full library.

Click Bookmark this LoRA to add the current selection to your favorites. The Bookmarks bar opens a searchable picker containing only those favorites; choosing one also changes the active LoRA. When the active LoRA is already bookmarked, the button changes to Remove bookmark and asks for confirmation before removing it.

Save and use trigger words

When you bookmark a LoRA, you can optionally save a trigger word or phrase. Edit Trigger Word lets you change it later. If the selected LoRA is not yet bookmarked, the trigger-word button offers to bookmark it first.

When a bookmarked LoRA has a saved trigger, a trigger row appears on the node. Click that row to copy the phrase to your clipboard, then paste it into a prompt field such as CLIPTextEncode. The node’s separate trigger STRING output lets you incorporate saved triggers into a prompt chain. It combines the saved triggers for the main and stacked LoRAs with commas; if none of the applied LoRAs has a saved bookmarked trigger, the output is empty.

Adjust LoRA strength

The main LoRA Strength control determines the strength applied to the model. Use its ◀ and ▶ controls to change the value in steps of 0.01, drag the middle of the control to adjust it, or double-click to enter a value directly. The default main strength is 1.0.

Stack LoRAs in one node

Click Add another LoRA to add an extra LoRA below the main one. You can add up to 10 extra LoRAs, for a total of 11 in one node. Each extra LoRA has its own strength control, so a combination can use different values for different LoRAs.

Click a stacked LoRA’s name to replace it using the same searchable picker. Use its arrow controls, drag control, or direct entry to adjust its strength; click ✕ to remove that row. The node shows only the rows you have added.

Save reusable LoRA sets

After you add at least one stacked LoRA, Save LoRA Set becomes available. Give the combination a name to save the main LoRA, its strength, and the entire stack with its strengths. Saving again under an existing name overwrites that set.

Load LoRA Set is always visible. Its searchable picker lets you select a saved set and apply its configuration to the node. You can also delete a set from that picker, with confirmation.

Chain another loader

Click Chain another LoRA Loader to create a new Finding LoRA node beside the current one. The extension connects it after the current node and redirects existing downstream MODEL connections through the new node:

upstream model → current loader → new loader → former downstream nodes

Use this when you want another separate loader in the model chain rather than another row inside the current node.

Two Finding LoRA loaders connected in a model chain

Keep favorites across nodes

Bookmarks are shared across Finding LoRA nodes. Adding a bookmark in one node updates the other Finding LoRA nodes on the canvas without a refresh or restart. Bookmarks and saved sets are kept in files under <ComfyUI>/user/finding-lora/, so they can be backed up. Changes made directly to those files require a ComfyUI restart to appear in the extension.

comfyui-lora-FindingLora Inputs and Outputs

Connection or settingWhat it does
model input (MODEL)Receives the model to which the LoRAs will be applied.
lora_nameHolds the main LoRA selected in the picker.
strength_modelSets the main LoRA’s strength; displayed as LoRA Strength.
lora_stackStores the additional LoRAs and their strengths. The node’s stack rows manage this for you; you do not need to edit the stored JSON.
model output (MODEL)Sends onward the model with the main and stacked LoRAs applied in order.
trigger output (STRING)Sends the comma-joined saved trigger phrases for applied, bookmarked LoRAs, or an empty string when there are none.

Troubleshooting comfyui-lora-FindingLora

I cannot find a LoRA in the picker.

  1. Open the LoRA picker and try a shorter portion of its filename.
  2. Check that the LoRA is in the loras/ folder available to ComfyUI.
  3. If you changed files outside the extension while ComfyUI was running, restart ComfyUI and search again.

My trigger output is empty.

  1. Check that the selected LoRA is bookmarked.
  2. Check that you saved a trigger word or phrase for that bookmark.
  3. If you are relying on stacked LoRAs, check their bookmarks and saved triggers too. The output includes saved triggers, not text guessed from LoRA filenames.

I saved a set but cannot see the save button now.

The Save LoRA Set button appears only when the node has at least one extra LoRA in its stack. Add an extra LoRA to make the button visible. Load LoRA Set remains visible even when the current stack is empty.

Changes I made directly to a bookmark or set file are not showing.

Restart ComfyUI after editing <ComfyUI>/user/finding-lora/bookmarks.json or <ComfyUI>/user/finding-lora/lora-sets.json directly. Changes made with the node’s bookmark controls synchronize across nodes without that restart.

A trigger appears on the node, but it is not in my prompt.

The trigger row is for viewing and copying the text. To add it manually, click the row and paste the copied phrase into your prompt. To include the node’s trigger output in a prompt chain, connect that output using a string-concatenation node.

Learn More about comfyui-lora-FindingLora

The screenshots below show the two main pickers. The LoRA picker searches the full library; the bookmark picker searches your saved favorites.

LoRA picker with alphabetical browsing and searchable results

Bookmarks picker with filtering and keyboard selection

comfyui-lora-FindingLora Related Nodes

RunComfy
Copyright 2025 RunComfy. All Rights Reserved.

RunComfy is the premier ComfyUI platform, offering ComfyUI online environment and services, along with ComfyUI workflows featuring stunning visuals. RunComfy also provides AI Models, enabling artists to harness the latest AI tools to create incredible art.

comfyui-lora-FindingLora detailed guide | ComfyUI