MiniMax H3 Image to Video + Semantic Bridge:
MiniMaxH3DistilledImageToVideo prepares a MiniMax H3 video-generation task by combining a written scene description with optional starting and ending images, then applying a selected distilled semantic-bridge adapter to the resulting guidance. This lets you describe motion and visual content while using images to establish the beginning, destination, or both ends of a sequence. The image guidance is prepared in two complementary ways: the images accompany the text during interpretation, and their encoded visual information is attached as keyframe guidance for generation. The node also creates the empty audio-video latent structure required by the native H3 workflow. Its role is preparation rather than rendering: sampling and decoding happen later in your workflow. The semantic bridge adds an adapter-based conditioning step, but the supplied code does not establish a guaranteed quality improvement, speedup, or particular visual effect for every adapter.
MiniMax H3 Image to Video + Semantic Bridge Input Parameters:
clip
A required CLIP connection used to interpret your written description together with any supplied frame images and turn them into conditioning that MiniMax H3 can use. Although the socket is named CLIP, the native H3 context describes a MiniMax-compatible encoder based on Qwen3-VL-32B, so you should connect the encoder intended for your H3 workflow rather than assume any standard CLIP model is interchangeable. When frame images are present, they are passed to the encoder alongside the text, allowing the conditioning to incorporate both. The node uses scheduled token encoding, preserving the conditioning structure produced by that encoder. There is no numeric range or default connection.
vae
A required VAE connection used to convert supplied frame images into the compact visual representations used as keyframe guidance. Connect a VAE compatible with the MiniMax H3 video model and its latent format; the native H3 video format has 24 latent channels and spatial compression by a factor of 16. When either optional frame image is present, this node calls the VAE encoder for that image and attaches the result to the conditioning. If neither image is supplied, the node does not call the VAE encoder, although the socket remains required by the interface. This node does not use this connection to decode a finished video. There is no numeric range or default connection.
prompt
A required multiline STRING describing the scene, action, camera movement, and other visual intentions for your video. Its default is an empty string, and the interface supports dynamic prompts. The node rejects text that is empty or contains only whitespace with the exact error Prompt is empty. A useful description explains how the scene should move rather than only listing visible objects; for example, “The subject turns toward the window as the camera slowly moves closer.” When frame images are connected, the text is encoded alongside those images. No minimum or maximum character count is specified, but the text must contain at least one non-whitespace character.
distilled_adapter
A required selection from the adapter filenames returned by the node package’s _list_safetensors() helper. This selects the distilled semantic-bridge adapter applied after the text and optional keyframe conditioning have been prepared. It is a conditioning-adapter selection, not the main video diffusion model or the VAE. The available choices depend on the safetensors files discovered in your installation; the supplied code does not show the discovery location, a fixed list of filenames, or an explicit default. Use an adapter documented as compatible with this Semantic Bridge node and your H3 setup. The adapter-loading and transformation implementation is not included, so its precise effect and compatibility requirements cannot be determined from this class alone.
alpha
A required FLOAT passed to the distilled-bridge operation as its adjustment-strength setting. The default is 0.10, the minimum is 0.0, the maximum is 1.0, and the interface step is 0.01. This gives you a way to vary how strongly the selected bridge transformation influences the conditioning, making it useful for controlled comparisons of the adapter’s effect. Start with the default before testing other values. The supplied class forwards this value to the bridge helper but does not show the blending formula, so you should not assume a linear visual response or that setting it to 0.0 skips adapter loading or all bridge processing.
magnitude_match
A required selection controlling the magnitude-matching mode passed to the distilled semantic bridge. The available options are per_token, global, and none, with per_token selected by default. In conditioning, magnitude refers to the numerical size of the encoded guidance rather than image brightness or output resolution. The option names indicate token-level matching, overall matching, or no magnitude matching, respectively, but the exact normalization calculations are not included in the supplied code. Keep the default for an initial test, then compare modes while holding the other settings constant if you need to assess their effect on your adapter’s behavior.
width
A required INT specifying the requested video canvas width in pixels. The default is 1344, the minimum is 32, the maximum is 16384, and the interface step is 32. This value is passed to the native H3 empty-latent creator and is also used when resizing any supplied frame images. Together with height, it determines the requested aspect ratio and affects the spatial size of the generation task. Larger dimensions generally require more memory and computation during downstream sampling and decoding. The interface’s maximum is not a guarantee that your hardware or model workflow can practically generate at that size. Use multiples of 32 as exposed by the interface.
height
A required INT specifying the requested video canvas height in pixels. The default is 768, the minimum is 32, the maximum is 16384, and the interface step is 32. It works with width to define the requested canvas and the dimensions used for frame-image preparation. Changing the aspect ratio can change how image content is resized or cropped, especially for the optional ending image, which explicitly uses center-crop mode. Larger heights increase the size of the latent generation task and generally increase memory requirements. Begin with the default 1344-by-768 canvas or another practical multiple-of-32 size rather than treating the full permitted range as a recommended operating range.
length
A required INT specifying the requested video length in frames. The default is 124, the minimum is 5, the maximum is 3600, and the interface step is 17. This value is passed to the native empty audio-video latent helper, which returns both the latent structure and a resolved frame count. When an ending image is supplied, the node places it at the last position of that resolved frame count, not directly at the requested length minus one. The helper’s frame-count adjustment rules are not shown, so do not assume every requested length is used unchanged. The native H3 context specifies 24 FPS, making 124 frames approximately 5.2 seconds at that playback rate, subject to the resolved count and your downstream video settings. Longer sequences generally require substantially more memory and processing time.
first_frame
An optional IMAGE connection establishing visual guidance at frame index 0. The node takes only the first image in the supplied image batch, resizes it to the requested canvas using the native helper’s disabled crop mode, includes it in the image-aware text encoding, and encodes it with the VAE as a starting keyframe. This provides an image anchor for the beginning of the video rather than simply adding a descriptive reference. For predictable composition, prepare the image at the intended canvas dimensions or aspect ratio, since the resize helper’s full implementation is not included. There is no default image or numeric range, and you can leave this disconnected while supplying an ending image or using text alone.
last_frame
An optional IMAGE connection establishing visual guidance at the final resolved frame position. The node takes only the first image in the supplied batch, resizes it to the requested canvas with center cropping, includes it in the image-aware text encoding, and encodes it with the VAE as an ending keyframe. This is useful when you want the sequence to arrive at a particular pose, composition, or scene state. Because center cropping can remove content near the edges, place important subjects centrally or prepare the image at the target aspect ratio. There is no default image or numeric range. If both frame inputs are connected, the starting image is included before the ending image during encoding; if only this input is connected, it is still assigned to the final resolved frame.
MiniMax H3 Image to Video + Semantic Bridge Output Parameters:
positive
A CONDITIONING output containing the encoded scene guidance after the selected distilled semantic bridge has been applied. Before bridge processing, the conditioning contains the prompt encoding and, when frame images are supplied, their VAE-encoded keyframes and the resolved frame count. In the native H3 workflow, keyframe conditioning provides reference information that is reinjected during sampling rather than treated as ordinary frames to denoise. Connect this output to the positive-conditioning input of your compatible H3 sampling workflow. It is not a rendered image, a video, or a diffusion model, and this node does not produce a separate negative-conditioning output.
latent
A LATENT output containing the empty audio-video latent structure created by the native H3 helper for the requested dimensions and length. It provides the compact working space used by the downstream sampler, rather than finished pixels or playable audio. The supplied native H3 context describes paired video and audio latent streams, with 24-channel video latents and 32-channel audio latents; this is therefore not an ordinary single-image latent. The frame images are attached to the conditioning as keyframes, not written into this output by this class. Pass the latent to a compatible H3 sampling workflow, then decode and assemble the generated results using the appropriate downstream nodes.
MiniMax H3 Image to Video + Semantic Bridge Usage Tips:
- Start with the default 1344-by-768 canvas, length 124, alpha 0.10, and
per_tokenmagnitude matching. Establish a working H3 sampling and decoding pipeline before experimenting with the bridge settings. - To animate a still image, connect it to
first_frameand describe the desired motion clearly. For example, “The person gently turns their head while the camera slowly tracks to the right” gives more motion direction than a description of appearance alone. - To guide a transition between two images, connect both frame inputs and describe a plausible action linking them. Large differences in subject placement, lighting, or scene content can make a coherent transition more difficult; an ending keyframe does not guarantee a physically natural path between images.
- Prepare both frame images at the target aspect ratio whenever possible. Pay particular attention to
last_frame, because its center-crop mode can remove important details at the edges. - If you connect an image batch, only its first image is used for each frame input. Select the intended image before connecting the batch rather than expecting this node to create multiple videos automatically.
- Compare bridge settings systematically: keep the prompt, frame images, dimensions, downstream sampler settings, and seed unchanged while adjusting only
alphaormagnitude_match. This makes the adapter’s influence easier to evaluate. - Reduce resolution or length when testing on limited-memory hardware. Both affect downstream generation cost, and the large maximum values in the interface are limits rather than recommended settings.
- Keep the entire workflow H3-compatible, including the encoder, VAE, diffusion model, sampler configuration, and decoding stages. This node prepares conditioning and latents; it does not load the main model, run sampling, or produce a finished video.
MiniMax H3 Image to Video + Semantic Bridge Common Errors and Solutions:
Prompt is empty.
- Explanation: This is the explicit error raised by the node when
promptis empty or contains only spaces, tabs, or line breaks. - Solution: Enter a description containing actual text. Include the intended action or camera movement, even when you supply starting or ending images.
Required input is missing
- Explanation: ComfyUI validation can stop execution when a required connection or setting is absent. In particular,
clipandvaeare required even though VAE encoding is only performed when a frame image is supplied. The exact validation message can vary. - Solution: Connect the appropriate H3 encoder and VAE, and ensure all required settings have valid values. Only
first_frameandlast_framemay be left disconnected.
Adapter list is empty or selected adapter is unavailable
- Explanation: The adapter choices come from safetensors files discovered by the package. If no suitable files are found, or a workflow refers to a file that is no longer available, adapter selection or execution may fail. The discovery path and exact error text are not provided in the supplied class.
- Solution: Check the Semantic Bridge package’s installation instructions for the expected adapter location, install a compatible adapter, and refresh or restart ComfyUI as needed. Reselect an available filename before running.
Adapter loading or tensor-shape mismatch
- Explanation: A missing, damaged, or incompatible adapter may fail during the bridge-processing step. Possible symptoms include file-loading errors or tensor-size mismatch messages, but the supplied code does not define their exact wording.
- Solution: Confirm that the file is a distilled semantic-bridge adapter intended for this node and your encoder configuration. Download it again if corruption is suspected, and avoid substituting an unrelated LoRA or model checkpoint.
Encoder error during tokenization or scheduled encoding
- Explanation: The node asks the encoder to tokenize text together with an image list and then perform scheduled encoding. An incompatible encoder may not support the expected image handling or conditioning format; exact error messages depend on the connected implementation.
- Solution: Use the MiniMax H3-compatible encoder recommended for your workflow. If the problem appears only after adding images, verify the image-aware encoder setup rather than assuming an ordinary text-only CLIP connection is sufficient.
VAE encoding error or incompatible latent dimensions
- Explanation: A supplied frame image is encoded with the connected VAE. An incompatible VAE can fail immediately or produce keyframe latents that cause a shape or channel mismatch later during sampling.
- Solution: Use the VAE intended for the H3 video model. If the problem begins when adding frame guidance, check the VAE and image connections first; reconnecting a generic image-model VAE is not a reliable substitute.
CUDA out of memory
- Explanation: Available GPU memory can be exceeded during encoding, latent allocation, or downstream generation. Large dimensions, long sequences, and the memory demands of the H3 encoder and model can all contribute. Exact wording varies by device and runtime.
- Solution: Lower width, height, or length, release other GPU workloads, and use memory-management options supported by your H3 workflow. Test a shorter, smaller sequence before increasing the workload.
Input value failed validation
- Explanation: Values outside the declared ranges or unavailable combo selections can be rejected before the node runs, especially when loading a workflow created in another installation. The exact validation text depends on ComfyUI.
- Solution: Keep
alphabetween 0.0 and 1.0, width and height between 32 and 16384 using the interface’s 32-pixel increments, and length between 5 and 3600. Selectper_token,global, ornonefor magnitude matching and choose an adapter available in your installation.
Downstream sampler or decoder rejects the latent
- Explanation: This node prepares native H3 audio-video latents, which differ from ordinary image latents. Connecting them to an incompatible model, sampler setup, or decoder can produce type, shape, or channel errors.
- Solution: Use an H3-compatible audio-video workflow and follow its expected sampling and decoding connections. Do not route this latent directly into a conventional image-only generation pipeline.
