MiniMax-H3-T2VA-Draft-Continue Introduction
MiniMax-H3-T2VA-Draft-Continue lets you inspect an estimated first frame before finishing a MiniMax H3 video-and-audio generation. You generate a short Draft, review its rough composition, then choose whether to continue the same generation. This helps you avoid spending the remaining sampling steps on a scene whose subject placement or overall layout is already wrong.
The extension is particularly useful for text-to-video/audio (T2VA). In the author’s tested workflows, T2VA was substantially faster than image-conditioned video/audio (I2VA). Rather than switching to I2VA just to inspect an input image, you can preview how your text prompt is beginning to take shape. Actual speeds depend on your models, settings, and hardware.
The preview is an early estimate, not a finished frame. Expect blur and missing detail; judge broad composition and spatial relationships rather than final sharpness. The extension also supports I2VA workflows, where a preview can show how multiple subject-reference images are being brought together in the generated scene.
How MiniMax-H3-T2VA-Draft-Continue Works
Think of the workflow as pausing midway through a sketch:
- Draft: H3 begins generating from your existing prompt, conditioning, and sampling settings. The Draft Sampler pauses at your chosen preview step and shows an estimated first frame.
- Review: You inspect the overall layout. If the scene needs a change, adjust the workflow and create a new Preview.
- Continue: If you approve the preview, click GO. The Continue Sampler resumes from the saved Draft state. Your usual video/audio decoding and saving nodes then process the result.
GO does not start over or use the preview image as an I2VA input. It continues the generation already in progress. For the recommended six-step example, a preview after step 3 leaves three steps to run after approval. Choosing step 4 or 5 may give you a clearer estimate, but you wait longer for the preview and have fewer steps remaining. Preview-step settings change when you inspect the generation, not its pixel resolution.
The extension fits around your existing H3 workflow rather than replacing it:
Your H3 model, prompt, conditioning, noise, guider, sampler, and schedule
↓
H3 Draft Sampler
First-frame preview
↓ saved Draft state
H3 Continue Sampler
↓
Your video/audio Decode → Save
Model loading, references, and prompt preparation stay upstream. Your normal decoding, post-processing, and saving stay downstream.
MiniMax-H3-T2VA-Draft-Continue Features
Review before committing to the final output
The recommended starting point is 6 total steps with a preview after 3 steps. At that point, look for questions such as: Are the subjects on the intended sides of the frame? Does the scene have the broad composition you wanted? Do not treat preview blur as evidence that the finished video will have the same level of detail.
A no-BBOX workflow template (https://raw.githubusercontent.com/ukr8b3g-cmyk/MiniMax-H3-T2VA-Draft-Continue/main/examples/H3-Draft-Sampler-Turbo6.json) demonstrates this basic approach without layout-box nodes. Its defaults include Euler/simple sampling, 6 total steps, 3 preview steps, 24 fps, and approximately 5 seconds of output. Select the H3 model, text encoder, VAEs, and compatible Turbo LoRA available in your own setup. The author checked this particular template structurally but did not rerun the exact template on a GPU.
Clear Preview and GO status
Draft and Continue share a review panel that can show PREVIEW REQUIRED, PREVIEW RUNNING, READY TO GO, PREVIEW STALE, CONTINUING, COMPLETE, or an error. Preview, New Seed, and GO controls are in that panel. GO is available only when the connected Draft has a valid, reviewed preview.
If you change something that affects generation after previewing, the interface marks the preview as stale and requires a new one. GO also checks the upstream workflow again immediately before queuing Continue. Completion is shown only after the queued output chain succeeds—not merely when you click GO.
Layout and reference awareness
You can use the extension with H3 Structured Canvas layouts. Its Structured Layout Audit checks that the layout and exact compiled prompt being continued still match the ones you reviewed. Depending on your workflow, supported layouts include static START boxes, START→END movement, and Multi-Key timelines for slots A/B/C. This is a consistency check; it does not make the model obey boxes more strongly.
Native H3 reference conditioning is supported without adding reference-image ports to the Draft or Continue nodes. Keep references in your normal upstream H3 nodes. The extension preserves them and detects changes to their content, number, order, type, or native metadata after Preview. In a two-image I2VA workflow, for example, the images can identify a courier and a rover while the Draft preview reveals how the generated scene places them together. They are subject references, not prescribed first and last frames.
Continue within the supported sampling workflow
The documented scope covers native MiniMax H3 joint video/audio latent generation with batch size 1, Core BasicGuider/CFGGuider/DualCFGGuider, Core Euler without churn, external H3 flow SIGMAS, and native minimax_refs. Draft state is tied to the current ComfyUI backend session and has a 512 MiB payload budget. Live ControlNet or hook objects, noise masks, custom or multi-model guiders, and solvers requiring multistep history need dedicated adapters; do not assume they will resume through this pair.
MiniMax-H3-T2VA-Draft-Continue Models
This extension does not include model weights or introduce a separate model to choose. It works with the MiniMax H3 model and supporting components in your ComfyUI workflow. For the provided examples, you select your installed H3 model, text encoder, VAEs, and compatible Turbo LoRA.
The choice illustrated in the documentation is between workflows, not extension models:
- T2VA: Start from text. Use Draft to check the scene taking shape while retaining the speed advantage observed in the author’s tested T2VA workflows.
- I2VA with references: Supply images through native H3 reference conditioning. Use Draft to see how the model combines those subjects into its generated composition.
The documented baseline uses a shared 4-step Turbo LoRA at strength 1.0 with 6 total sampling steps and a preview after step 3. Treat it as a starting example rather than a guarantee of the same speed or appearance on every setup.
What’s New with MiniMax-H3-T2VA-Draft-Continue
- v1.7.6 — Safer workflow-tab state: Reviewed states can survive normal switches between already-open ComfyUI workflow tabs. A full page reload cannot reuse approval from the previous page, and reopening a saved workflow requires a new Preview. Relevant edits also trigger a stale-preview check while Draft is ready.
- v1.6.0 — Unified review panel: Draft and Continue gained synchronized status and Preview, New Seed, and GO controls. GO remains guarded by a workflow check immediately before queuing.
- v1.5.0 — Multi-Key timeline checks: The audit can track supported A/B/C timelines with START, up to seven intermediate keys, and END per slot. Changing key positions, times, order, count, duration, or the compiled prompt requires a new Preview. The extension audits the timeline; it does not create or interpolate keys.
- v1.4.0 — START→END layout support: The audit can track a supported transition between START and END boxes, so changing either after Preview invalidates the old approval.
- v1.3.1 and v1.3.0 — Static layout auditing: The optional Structured Layout Audit began checking static START boxes and compiled-prompt consistency. A timeline wrapper that makes no actual layout change can be treated as the same static layout.
- v1.2.0 — Native reference transparency: Draft/Continue preserves native H3 references and records information that helps detect a changed reference setup before continuation.
The original documentation reports GPU/UI validation for these development phases, including combined reference-and-layout workflows and later lifecycle checks. The package metadata identifies version 1.7.11; the provided context does not describe separate user-facing changes for that version.
Troubleshooting MiniMax-H3-T2VA-Draft-Continue
GO is disabled or the panel says “PREVIEW REQUIRED”
- Check that Draft and Continue are connected in the same workflow.
- Run Preview and wait until it finishes.
- Review the displayed first-frame estimate. GO becomes available only for a valid reviewed Draft.
A saved workflow does not save preview approval. If you reopen it, run Preview again.
The panel says “PREVIEW STALE / NEW PREVIEW REQUIRED”
Something relevant to generation changed after you reviewed the Draft—for example, a prompt, layout box, timeline key, duration, or reference image.
- Finish the intended edits.
- Run a new Preview.
- Review that new estimate before clicking GO.
This protection prevents an old approval from being applied to a changed scene.
The preview looks blurry
That is expected early in sampling. At the recommended step 3 of 6, assess the large shapes and where subjects appear, not fine texture. If you need a more readable estimate, try previewing after step 4 or 5. This increases the wait before review; it does not increase output resolution.
Continue does not reach “COMPLETE”
The panel reaches COMPLETE only after the queued output chain succeeds. Check ComfyUI’s queue and the downstream Decode and Save nodes for an error. If you changed the workflow after Preview, create a new Preview before trying GO again.
Frequently asked questions
Does GO turn the preview into an input image?
No. It resumes the saved generation rather than restarting in I2VA mode.
Can I use the extension without BBOX or Structured Canvas?
Yes. Start with the no-BBOX template (https://raw.githubusercontent.com/ukr8b3g-cmyk/MiniMax-H3-T2VA-Draft-Continue/main/examples/H3-Draft-Sampler-Turbo6.json).
Do reference images set the first and last video frames?
Not in the documented two-image I2VA example. They act as subject references; the preview shows the generated scene’s estimated first frame.
Will a reviewed preview remain approved after I close and reopen a workflow?
No. You must preview again. Normal switches between already-open tabs can retain session state, but a full page reload cannot reuse the previous page’s approval.
Does Structured Layout Audit guarantee that subjects follow my boxes?
No. It checks whether the layout and compiled prompt still match what was reviewed; it does not guarantee visual obedience or motion quality.
Learn More about MiniMax-H3-T2VA-Draft-Continue
- Start without layout boxes: Download the no-BBOX workflow (https://raw.githubusercontent.com/ukr8b3g-cmyk/MiniMax-H3-T2VA-Draft-Continue/main/examples/H3-Draft-Sampler-Turbo6.json).
- Follow a text-only layout walkthrough: Watch the BBOX Layout, Preview & Continue tutorial and download its T2VA Neon workflow (https://raw.githubusercontent.com/ukr8b3g-cmyk/MiniMax-H3-T2VA-Draft-Continue/main/examples/H3-BBOX-Draft-Continue-Neon-v1.json). The video demonstrates setting START/END boxes, reviewing a three-step preview, and continuing the remaining three steps. See also tutorial setup and model settings.
- Explore two-image I2VA: Watch the Cyberpunk tutorial, then download the workflow and both reference images (https://raw.githubusercontent.com/ukr8b3g-cmyk/MiniMax-H3-T2VA-Draft-Continue/main/examples/H3-I2VA-BBOX-Cyberpunk-v1.zip). Reference setup and recorded result explains the example further.
- Adapt an existing workflow: Read workflow integration, Structured Layout Audit guidance, and the Multi-Key workflow example.
- Review tested scope: See validation and the reference GPU gate.
The extension is available under the Apache License 2.0. ComfyUI, model weights, and other extensions have their own licenses.
