Save 4 hours! We auto-setup your workflow! Free!

Drop your workflow.json — we handle every dependency, custom node, and model. Just open the link and run.

Auto-Setup Workflow Json (Free) Now!
ComfyUI > Nodes > Seedream4.5-comfyui-doubao4.5-comfyui

ComfyUI Extension: Seedream4.5-comfyui-doubao4.5-comfyui

Repo Name

Seedream4.5-comfyui-doubao4.5-comfyui

Author
ninepoin4 (Account age: 1356 days)
Nodes
View all nodes(1)
Latest Updated
2026-07-04
Github Stars
0.0K

How to Install Seedream4.5-comfyui-doubao4.5-comfyui

Install this extension via the ComfyUI Manager by searching for Seedream4.5-comfyui-doubao4.5-comfyui
  • 1. Click the Manager button in the main menu
  • 2. Select Custom Nodes Manager button
  • 3. Enter Seedream4.5-comfyui-doubao4.5-comfyui in the search bar
After installation, click the Restart button to restart ComfyUI. Then, manually refresh your browser to clear the cache and access the updated list of nodes.

Visit ComfyUI Online for ready-to-use ComfyUI environment

  • Free trial available
  • 16GB VRAM to 80GB VRAM GPU machines
  • 400+ preloaded models/nodes
  • Freedom to upload custom models/nodes
  • 200+ ready-to-run workflows
  • 100% private workspace with up to 200GB storage
  • Dedicated Support

Run ComfyUI Online

Seedream4.5-comfyui-doubao4.5-comfyui Description

Seedream4.5-comfyui-doubao4.5-comfyui adds ComfyUI nodes for text-to-image and image-to-image generation via Volcengine’s Seedream 4.5 API, with up to four reference images and image sequences.

Seedream4.5-comfyui-doubao4.5-comfyui Introduction

Seedream4.5-comfyui-doubao4.5-comfyui adds two nodes to ComfyUI for creating images with the Seedream 4.5 model through Volcengine’s API. You can generate an image from a written description or provide existing images as visual references. This lets you use Seedream within a ComfyUI workflow alongside your usual image-loading, preview, and saving nodes.

The extension sends requests to an online service, so you need a Volcengine API key, an account with sufficient quota, and a working network connection. The author notes that you should set the timeout when first using the nodes; 30–100 seconds is a suggested starting range.

How Seedream4.5-comfyui-doubao4.5-comfyui Works

Think of each node as a bridge between your ComfyUI canvas and Seedream 4.5:

  1. You write a prompt describing the image you want.
  2. For image-to-image work, you also connect one to four reference images.
  3. The node sends your prompt, settings, and any reference images to Volcengine’s image-generation API.
  4. It returns the generated image or images through an IMAGE output, which you can connect to a preview or save node.

For example, you could use Text2Image to create a scene from the prompt “a quiet greenhouse at dawn, soft light, watercolor illustration.” With Image2Image, you could connect a reference image and ask for a new interpretation of its subject or style. When you provide multiple references, the node sends all of them for the API to consider together.

Reference images are converted to Base64 Data URLs before being sent to the API. You do not need to prepare that format yourself.

Seedream4.5-comfyui-doubao4.5-comfyui Features

Text-to-image and image-to-image nodes

  • Seedream 4.5 Text2Image creates images from a text prompt alone.
  • Seedream 4.5 Image2Image creates images using a prompt and at least one connected image. Its optional image2, image3, and image4 inputs let you supply up to four references in total.

To make a simple text-to-image workflow, add Seedream 4.5 Text2Image from the Seedream node category, enter your prompt and API key, then connect IMAGE to a preview or save node. For image-to-image, use Seedream 4.5 Image2Image and connect an image to its required image input before running the workflow.

Settings available on both nodes

SettingWhat it does
promptA multiline description of what you want to generate.
api_keyYour Volcengine API key. The node uses a password-style input field to conceal it while you type.
modelThe API model name. The default is doubao-seedream-4-5-251128.
sizeSelects an output-size option: 1K, 2K, 720x1280, or 1280x720. The last two options offer portrait and landscape proportions, respectively.
watermarkControls whether a watermark is requested.
timeoutSets how long the node waits for a network request before timing out. The allowed range is 1–300 seconds; the default is 30 seconds.
sequential_image_generationControls sequence generation with disabled, auto, or enabled. The default is disabled.
max_imagesSets the maximum number of images in a sequence, from 1 to 8. The default is 1, and this setting only applies when sequence generation is active.

For a single image, leave sequence generation disabled and max_images at 1. If you want a sequence, choose a sequence-generation mode and raise max_images to the number you need, up to 8. If a request regularly runs out of time, try increasing timeout within its allowed range.

Both nodes return an IMAGE output. If an API request fails, the extension may return the original input image or a black placeholder instead of a newly generated image. If the result looks unchanged or entirely black, check for an error before treating it as a successful generation.

Seedream4.5-comfyui-doubao4.5-comfyui Models

The readme identifies one default model: doubao-seedream-4-5-251128. Both the text-to-image and image-to-image nodes use it by default.

The model field accepts a model name, but the provided documentation does not identify or describe other supported models. The two nodes are different ways of working with the API, not two separate models.

What's New with Seedream4.5-comfyui-doubao4.5-comfyui

v1.1.0 — December 20, 2025

  • Added a configurable request timeout from 1 to 300 seconds, giving you more time for requests that do not finish within the 30-second default.
  • Added sequential image generation for up to eight images.
  • Improved handling of multiple reference-image inputs.

v1.0.0 — December 20, 2025

  • Released the initial text-to-image and image-to-image nodes.
  • Added support for up to four input images for image-to-image generation.

Troubleshooting Seedream4.5-comfyui-doubao4.5-comfyui

The Seedream nodes do not appear in ComfyUI

  1. Restart ComfyUI.
  2. Search the node menu for the Seedream category.
  3. If the nodes are still missing, check the ComfyUI console for an error reported while loading the extension.

An API request fails or times out

  1. Confirm that the API key entered in the node is correct.
  2. Check that your Volcengine account has sufficient quota.
  3. Confirm that your network connection is working.
  4. Check the timeout setting. The default is 30 seconds; the author suggests trying a value between 30 and 100 seconds when first using this version.
  5. Run the workflow again and review any error shown in ComfyUI.

The output is unchanged or black

The extension’s error handling may return the input image or a black placeholder when the API fails. Review the error, then check your key, quota, connection, and timeout before running the workflow again.

The image has the wrong size or proportions

Check the node’s size selection. Available options are 1K, 2K, 720x1280, and 1280x720.

Frequently asked questions

Can I use more than one reference image?
Yes. The Image2Image node requires an image at image and accepts three more at image2, image3, and image4. All connected images are sent to the API as references.

Do I need to convert my reference images before connecting them?
No. The node converts connected images to the format it sends to the API.

Why does changing max_images not produce a sequence?
max_images applies only when sequential image generation is active. Check sequential_image_generation as well as the image limit.

Does this extension generate images entirely inside ComfyUI?
No. The nodes call Volcengine’s online API and return its results to your ComfyUI workflow.

Learn More about Seedream4.5-comfyui-doubao4.5-comfyui

The Volcengine console (https://console.volcengine.com/) is the resource identified in the original documentation for creating an API key and checking your account. The extension is a third-party integration, not an official Volcengine tool. Your use of the service must follow Volcengine’s terms and usage policies.

The extension is released under the MIT License.

Seedream4.5-comfyui-doubao4.5-comfyui Related Nodes

RunComfy
Copyright 2025 RunComfy. All Rights Reserved.

RunComfy is the premier ComfyUI platform, offering ComfyUI online environment and services, along with ComfyUI workflows featuring stunning visuals. RunComfy also provides AI Models, enabling artists to harness the latest AI tools to create incredible art.

Seedream4.5-comfyui-doubao4.5-comfyui detailed guide | ComfyUI