Doss-Node-Suite Introduction
Doss-Node-Suite is a collection of custom nodes for ComfyUI. It brings several practical tools into your visual workflow: canvas labels, image comparison, image saving, a workflow timer, a Multi-LoRA loader, and controls for LTX 2.5 motion workflows.
The nodes solve different everyday problems. You can label a complicated canvas without adding work to image generation, compare an original image with a result, save a batch without breaking its connection to downstream nodes, or see how long a workflow takes. For motion projects, the suite provides controls for planning and preparing motion paths.
You can find the project in the Doss-Node-Suite repository. In ComfyUI, search for Doss or browse the ⚡ Doss Node Suite category.
How Doss-Node-Suite Works
A ComfyUI workflow is a set of connected nodes. Each node has a particular job, such as receiving an image, changing a setting, or passing a result along. Doss-Node-Suite adds tools at different points in that process:
- Canvas utilities help you organize or monitor your workspace. Doss Label Maker adds visible notes, while Doss Workflow Timer and Alarm shows progress. Neither needs an image connection.
- Image utilities receive
IMAGEdata. Doss Image Comparer lets you inspect images visually; Doss Save Image writes them to your ComfyUI output folder. Both can pass images onward, so they need not be the end of a workflow. - Model and motion controls prepare inputs for other parts of a workflow. Doss Multi-LoRA Loader applies an ordered set of LoRAs to a
MODELandCLIPpair. The LTX 2.5 nodes help you set motion parameters, draw paths, and convert those paths into coordinates for the official LTX motion workflow.
For example, you might generate an image, connect the original and edited versions to Doss Image Comparer, then send the image onward to Doss Save Image. You could place a label beside that part of the canvas to explain its purpose and keep a timer visible while the workflow runs.
Doss-Node-Suite Features
Doss Label Maker
Doss Label Maker places free-floating text on your workflow canvas. Use it for section titles, reminders, or notes that explain what a group of nodes does. It is a visual-only node: it has no sockets, does not run during generation, and does not consume generation resources. Your text is saved with the workflow.
When the label is not selected, only its text is visible. Click it once to reveal a temporary outline and resize handle; double-click inside the text area to open the editor. The editor lets you change the text, font, color, opacity, alignment, wrapping, spacing, text direction, and effects such as outlines and shadows. It offers more than 80 curated installed-font choices as well as custom fonts. The outline and shadow effects have their own enable checkboxes, so you can turn them on only when needed.
A large, high-contrast title can help you find a workflow section quickly; smaller, quieter text can provide instructions without dominating the canvas. See the Label Maker documentation for the full set of controls.
Doss Image Comparer
Doss Image Comparer shows two images inside one node while passing IMAGE data through its outputs. Connect an image to the required image_a input and, when available, a second image to the optional image_b input.
Choose between two display modes:
- Side By Side: Shows A on the left and B on the right. This is useful for judging the overall composition of two results.
- Slider: Shows A and B on opposite sides of a movable split. The corner labels identify
A: OriginalandB: Result, making it easier to inspect local changes.
If you connect only image_a and it contains a batch of at least two images, the comparer uses the first two for display. If only one image is available, it displays and returns that image safely. Its two IMAGE outputs let you continue using the images elsewhere in your workflow; when there is no second image, the image_b output mirrors image_a.
Doss Multi-LoRA Loader
Doss Multi-LoRA Loader keeps multiple installed LoRAs in one node instead of requiring a chain of separate loaders. Each row lets you select a LoRA, set separate MODEL and CLIP weights, and enable or bypass it with a checkbox. Use + Add LoRA to add a row, × to remove one, and Refresh to reload the installed LoRA list.
Rows are applied from top to bottom, and the stack is saved with your workflow. This makes it easier to revisit a combination later or temporarily disable one LoRA while comparing results. Different weights change how strongly a selected LoRA affects the corresponding model and CLIP inputs.
The loader reports problems such as missing files, incompatible LoRAs, invalid saved stack data, or unsupported stack versions rather than silently choosing a different file. See the Multi-LoRA Loader documentation.
Doss Save Image
Doss Save Image saves every image in an incoming IMAGE batch and displays the saved files as previews inside the node. It also passes the original image batch through its image output unchanged, so you can continue the workflow after saving.
You can customize:
| Setting | What it changes |
|---|---|
filename | The base name of saved files. Existing files are not overwritten; a number is added when needed, such as ComfyUI(1).png. |
save_location | The destination within ComfyUI’s normal output folder. Use output for the main folder or a relative subfolder such as portraits/session_01. The Browse button shows output-relative folders. |
file_format | The output type: JPEG, PNG, PDF, WEBP, TIFF, ICO, or BMP. |
save_metadata | Attempts to embed available metadata when the chosen format supports it. |
save_metadata_text_file | Writes an accompanying .txt file with available generation metadata and save details. |
PNG and WEBP preserve transparency when possible; JPEG and PDF place transparent areas on white. ICO creates a 256 × 256 icon file for each batch image. PDF and ICO can be saved, although preview support in ComfyUI or your browser may be limited. The node does not expose quality or compression sliders.
For safety, save locations must stay inside the normal ComfyUI output directory. Absolute paths and paths that try to move outside it are rejected. Invalid Windows filename characters are replaced with underscores.
Doss Workflow Timer and Alarm
Doss Workflow Timer and Alarm is a canvas display with no input or output connections. It starts timing when ComfyUI starts execution, updates while the workflow runs, and shows the elapsed time when execution succeeds. It can also show Ready, Running, Complete, Error, or Canceled.
You can choose whether to show the label, status, and milliseconds. Appearance controls include timer font size and color, background color and opacity, border color, and corner radius. Display-only mode reduces the normal node interface while keeping the timer draggable and its customization available by double-clicking.
For an audible notification after a successful run, enable the alarm and choose Ping or Beep and a volume. The sound is generated by the browser; it does not need an external audio file. The alarm stays silent when disabled or when volume is 0.
Doss Motion Controls for LTX 2.5
Three companion nodes support the official LTX motion-path workflow. Doss provides the control nodes; LTX 2.5 and the Motion Track workflow are Lightricks technology.
- Doss Motion Settings | LTX 2.5 brings prompt, timing, seed, motion, adherence, and frames-per-second controls together. It also calculates related frame values, helping you keep timing choices consistent.
- Doss Motion Studio | LTX 2.5 shows the upstream starting image before generation and lets you draw named motion paths over it. Think of a path as a route marked on a picture: it describes where motion should go. The node stores paths in a portable normalized form and blocks stale or invalid plans.
- Doss Resolve Motion Tracks | LTX 2.5 checks those paths and converts them into one LTX-format coordinate per frame for the official motion path.
These nodes are intended to work as a set: choose your motion settings, draw paths against the starting image, then resolve those paths for the LTX workflow. For interface details and compatibility boundaries, see the LTX motion documentation.
Troubleshooting Doss-Node-Suite
The image comparer shows the same image twice
- Check whether
image_bis connected. - If it is not, check whether
image_acontains a batch with at least two images. The comparer uses the first two images in that case. - If only one image is available, connect a second image to compare two different results. Mirroring the first image is the expected behavior when no second image exists.
Doss Save Image rejects a folder
- Set
save_locationtooutputto test saving in the main ComfyUI output folder. - For a subfolder, use an output-relative path such as
portraits/session_01, or choose a folder with Browse. - Remove drive letters, absolute paths, and
..path segments. The node will not save outside ComfyUI’s output directory.
A saved PDF or ICO has no preview
Check the ComfyUI output folder for the saved file. The node can save PDF and ICO files, but ComfyUI or your browser may not display those formats as image previews. If an in-node preview is important to your workflow, choose a format with supported image preview behavior, such as PNG.
A LoRA stack fails to run
- Open Doss Multi-LoRA Loader and check that each enabled row points to an installed LoRA.
- Click Refresh if the installed LoRA list has changed.
- Check whether the selected LoRAs are compatible with the workflow’s model and CLIP inputs.
- Read the reported error. The loader deliberately stops on missing files or invalid stack data instead of substituting another LoRA.
Motion Studio will not use a drawn plan
Check that the upstream starting image is the one you intend to use, then review the drawn paths for incomplete or invalid entries. Motion Studio blocks stale or invalid plans so that a path drawn for the wrong image is not passed along unnoticed. The LTX motion documentation explains the companion workflow in more detail.
Frequently asked questions
Does Doss Label Maker slow down generation?
No. It is a frontend-only visual label and does not enter prompt execution.
Will Doss Save Image overwrite an existing image?
No. It adds a number to the filename when a file with that name already exists.
Can I keep using an image after comparing or saving it?
Yes. Doss Image Comparer provides IMAGE outputs, and Doss Save Image passes its incoming IMAGE batch through unchanged.
Why did the timer not sound when the run ended?
The alarm plays after successful workflow completion only when it is enabled and its volume is above 0. Check both settings.
Are the Doss motion nodes an LTX model?
No. They are companion controls for the LTX 2.5 motion workflow, not a replacement for Lightricks’ technology.
Learn More about Doss-Node-Suite
- Project repository: The source for the node suite and its documentation.
- Label Maker guide: Details on editing and displaying canvas text.
- Multi-LoRA Loader guide: More information about LoRA rows and saved stacks.
- LTX motion guide: The motion-node interface and its relationship to the official LTX workflow.
- Image Comparer example workflow and Save Image example workflow: Small examples for placing and testing those nodes, not complete production workflows.
